60W Laser Power Supply

porducts list

contact datails

JINAN HONGYUAN ELECTRIC CO., LTD

No.15 Lanxiang Road, Jinan, Shandong

86-531-88190005, 88190006

Larger photo of 60W Laser Power Supply

60W Laser Power Supply


company	JINAN HONGYUAN ELECTRIC CO., LTD
Update	2011-03-30
Original Region	China
prev 1 2 3 4 5 6 7 8 9 10 next

60W Laser Power Supply

60W Power Supply for CO₂ Laser Tubes

1. Main Features:

1) Good compatibility: It can be applicable to 40W and 30W laser tubes of a number of manufacturers.

2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect.

3) Dramatically lengthen the service life of laser.

4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.

6) The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.

8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.

9) Application: Acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.

2. Specification

Input	Input Voltage	AC220V or AC110V（to be specified when placing order）
	AC frequency	47—440HZ
	Cold Surge Current	≤60A(AC220V Input)	≤30A(AC110 Input)
	Current Leakage	≤0.7MA（AC220V Input）	≤0.4MA(AC110V Input)
Output	Maximum Input Voltage	DC 35KV
	Maximum Output Current	DC 23MA
Efficiency	≥90（full load）
Mean Time Between Failure (MTBF)	≥1000H
Response Speed	≤1ms（from the switch Signal is given to the output current up to 90% of the setting current）
Control Interface	TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Pressure-proof	Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection	can work in open-circuit condition for a short time（Require a good protective earthing and avoid arc between the positive and the machine shell）
Environmental	Operating Temperature：-10~40℃Relative Humidity (RH)：≤90
Cooling Way	Force-Air Cooling (FAC)
Dimension	L×W×H=20714497(mm)